As one of the core components of the equipment, linear guides and linear shafts play a guiding and supporting role. In order to ensure the high processing accuracy of the machine tool, the guide rail and the straight line are required to have high guiding accuracy and good motion stability. During the operation of the equipment, due to the large amount of corrosive dust and smoke generated during the processing of the processed parts, these dust and smoke are deposited on the surface of the guide rail and the straight shaft for a long time, which greatly affects the processing accuracy of the equipment. And it will form corrosion spots on the surface of the straight shaft of the guide rail, shortening the service life of the equipment. In order to make the machine work normally and stably and ensure product quality, it is necessary to do a good job of daily maintenance of the guide rail and the straight shaft. To clean the guide rails, please prepare-dry cotton cloth and lubricating oil. For example, the guide rails of the engraving machine are divided into linear guides and roller guides. Cleaning of linear guide: first move the laser head to the right (or left) to find the linear guide. Wipe with a dry cotton cloth until it is bright and dust-free, and add a small amount of lubricant (you can use sewing machine oil, do not use oil). Slowly push the laser head several times to distribute the lubricant evenly.
Rengøring af lineær styreskinne: flyt tværbjælken til indersiden, åbn endedækslerne på begge sider af maskinen, find styreskinnen, tør kontaktområdet mellem de to sider af styreskinnen og rullen af med en tør bomuldsklud , og flyt derefter tværbjælken for at rense resten.
Hvordan forebygger man rust?
The main reason for the rust of linear guides is that we don't know enough about them. Normal linear guides need to be wiped with anti-rust oil before leaving the factory. However, after a period of use, it will still show serious rust. After the linear guide is used, it needs to be coated with anti-rust oil again. This is very important for anti-rust. Although it should be applied to the factory during use, evaporation will definitely occur over time. Rust is inevitable. After coating the linear guide with anti-rust oil, it should be placed in a warehouse at room temperature. They should not be mixed with corrosive materials, nor can they be used temporarily. Store it directly on the floor of the warehouse, because the ground will accelerate the evaporation of rust preventive oil, so this requires you to pay more attention when using it.
Kontakt os
E-mail: sales@gyballscrew.com Tel(WhatsApp): 17769816967
seller@gyballscrew.com 17769815516
saleChen@gyballscrew.com 15325179771