Som metalmateriale er lineære styr nemme at ruste, og efter rust er det svært at vedligeholde. Så hvad skal vi gøre? Følgende er nogle tips til rustvedligeholdelse af lineære føringer. Jeg håber at kunne give dig din reference.
1. The stop time is greatly shortened, so that the linear rail is in a state of moving and working at all times, and rust is prevented by increasing the frequency and efficiency of use.
2. It would be great if the scalar of the linear guide can be strictly controlled. As long as the scalar is within the specified range, the service life is generally relatively long. At the same time, it would be perfect if the noise interference on the linear guide can be reduced.
3. When working in a high-speed environment, try to reduce the temperature rise of the motor as much as possible, and do not let the motor sling oil. If the power consumption can be reduced, it would be better to protect the motor.
4. Hvis du ønsker at rengøre det, så skal de adskilte komponenter klassificeres så meget som muligt, for der er forskellige måder at rengøre forskellige komponenter på, finrensning og groft rengøring. Vær samtidig opmærksom på ikke at placere den lineære guide diskret. I beholderen skal metalnettet bruges som buffer først, så komponenterne ikke kommer i kontakt med de snavsede stoffer i beholderen.
5. If you are working at low temperature, it would be great if you can ensure the spirituality of linear guide start and the spirituality of work in advance, and at the same time, try to keep the output power as small as possible in a low temperature environment.
6. Keep the environment as clean as possible when using it. If the surroundings can be clean and clean so that small dust does not enter the space near the linear guide, then the probability of wear can be greatly reduced, and vibration and noise can also be reduced.
In short, the maintenance of linear guides requires patience and persistence. Doing the above points can prevent rust and improve the maintenance effect.
